Globepointer® PT-35

Mobile High Frequency Personal GPS/GSM Tracker

Specification PT-35 Draft 4

Hardware Features:

* The GPS and GSM modules are integrated inside the tracking unit case.

* GPRS/ SMS and Voice I/O

* Up to 5.000 location / activation messages can be saved (automatic)

* Built in motion switch

* Battery charge circuit to charge 3.7 Volt Li-ion battery

* Panic input button (will power up the unit from deep sleep mode)

* Park Switch

* Super low battery use in deep sleep mode (low power timer on) (Up to 3 years with 3.7V/1100mA battery)

* Timer circuit can wake up unit by time (hours – minutes – seconds – days Months) or any configured time or date.

* Time backup battery will last up to 3+ years without battery or external power connected.

* 18 Pin mini multi I/O connector

* One digital inputs (0 to 60VDC)

* One analogue – digital input (3.3VDC)

* External battery backup option (to connect second battery or Solar panel option)

* USB to Serial (Serial RS232 port (9600 baud Rate)) for external communication, firmware upgrade or direct access to modem (9600 baud rate).

* Build in Amplified Speaker (1.25Watt output power) and Microphone

* Build in Active high performance GPS antenna

* Unit can be activated from deep sleep mode using Panic input, wire connection (will activate the unit when wire is broken or cut) or when closed loop is opened.

* Low battery led indicator

* Status and GPS led indicator

* Build in buzzer for warning and motion detection

* External option to connect Speaker and Mic

* Operating temperature range -25 deg. C to +70 deg. C (Battery 0 – +60 Degrees C.)

Physical Characteristics:

Unit size: LxWxH 90.5x 39 x 15.5 mm (17.7 max)

Plastic / Waterproof if required

Case Environmental Characteristics:

Operational Temperature: - 25 ~ + 70 °C (board temperature)

Storage temperature -40°C to +80°C

1 Multi I/O connector (18 pin with locking pins)

1 On/Off switch / 1 Park switch / 1 Panic button

Electrical Characteristics :

Input Voltage: + 5 Volt DC regulated (USB port power)

Power Consumption: Depending on operating mode max up to 3 Years (using 3.7V/ 800 mA battery)

uBlox- LEA-4S chipset version (default)

Parameter Specification:

Receiver Type L1_frequency,C/A Code, 16-Channels

8192_time/frequency_search_windows

Max Navigation Update Rate 4 Hz

Accuracy Position

Position DGPS / SBAS2

2.5m CEP3 5.0m SEP4

2.0m CEP 3.0m SEP

Acquisition GPS Mode:

Cold Start 34 Sec (First time fix can be between 1-3 minutes)

Warm Start 33 Sec

Hot Start <3.5 Sec

Reacquisition <1 Sec

Sensitivity

Tracking -158 dBm

Acquisition & Re-acquisition -148 dBm

Cold Starts -142 dBm

GSM Modem Specifications:

Frequency bands

Tri-band: 900, DCS 1800, PCS 1900 or EGSM 850, DCS 1800, PCS 1900

Compliant to GSM Phase 2/2+

GSM class Small MS

Transmit power Class 4 (2W) at EGSM900

Class 1 (1W) at DCS1800 and PCS 1900

GPRS connectivity

GPRS multi-slot class 10

GPRS mobile station class B

DATA

GPRS:

CSD:

GPRS data downlink transfer: max. 85.6 kbps

GPRS data uplink transfer: max. 42.8 kbps

Coding scheme: CS-1, CS-2, CS-3 and CS-4

Supports the protocols PAP (Password Authentication Protocol) usually used for PPP connections.

Integrated TCP/IP protocol.

Support Packet Switched Broadcast Control Channel (PBCCH)

CSD transmission rates: 2.4, 4.8, 9.6, 14.4 kbps, non-transparent

Unstructured Supplementary Services Data (USSD) support

SMS, MT, MO, CB, Text and PDU mode

SMS storage: SIM card

Support transmission of SMS alternatively over CSD or GPRS.

SIM interface Supported SIM card: 1.8V ,3V

Audio features Speech codec modes:

Half Rate (ETS 06.20)

Full Rate (ETS 06.10)

Enhanced Full Rate (ETS 06.50 / 06.60 / 06.80)

Echo cancellation

Noise reduction

Phonebook management Supported phonebook types:

SM, FD, LD, MC, RC, ON, ME, BN, VM, LA, DC, SD

Application Toolkit Supports:

SAT class 3, GSM 11.14 Release 98

Real time clock Implemented

Timer function Programmable via AT command

Firmware upgrade Firmware upgradeable over serial interface

Coding schemes and maximum net data rates over air interface:

Coding scheme 1 Timeslot 2 Timeslot 4 Timeslot

CS-1: 9.05kbps 18.1kbps 36.2kbps

CS-2: 13.4kbps 26.8kbps 53.6kbps

CS-3: 15.6kbps 31.2kbps 62.4kbps

CS-4: 21.4kbps 42.8kbps 85.6kbps

Power use :

Using 800 mA/ 3.7Volt battery.

Timer - GPS – running – normal mode = 50mA

Timer – GPS – GSM – running normal mode = 100mA

Timer – running – normal mode – ADC working – All inputs = 7mA (No activation last 4 Days)

Stop mode – GPS/GSM off - Timer off – Activate by low power timer – Panic – or any digital input = 0.83 mA (No activation will last 40Days)

Stop mode 2 – GPS Off – GSM in sleep mode - Timer off – Activate by low power timer – Panic – SMS message or Call - or any digital input = 5 mA (No activation will last up to 6 Days)

Unit off – low power timer running.

Can only wake up by Panic input or timer. (No activation will last up to 3 + Years)

Possible applications:

- Security tracking

- Containers or Boats where no external power connection is available

- Remote locations

- Older people

- Dog tracking